TANZANIA - #likelafargeholcim

For building tips and information, follow us on

What is concrete bleeding?

What is concrete bleeding?

Concrete bleeding is a problem that can affect any batch of concrete that has been improperly measured and mixed. It is the movement of water to the surface of the concrete after it has been poured. Water collects on the surface of a concrete slab or structure when the water-to-cement ratio of the mix is too high (when too much water has been added to the batch). 

Bad proportioning of materials in a concrete batch is the main cause of bleeding. Too much water causes the concrete to segregate – a phenomenon where the heavy aggregates sink to the bottom of the mix, leaving the cement, sand and water at the surface of the structure. The water then seeps to the surface of the slab or structure, which creates big problems on the resultant integrity of the concrete.

When the water travels to the surface of the structure, it carries the fine particles of cement with it. This leaves a deficiency of cement within the rest of the structure. Since cement is the main binding material, the rest of the structure dries without much bonding between materials. Bleeding causes a weak, crumbly and dry concrete structure that cannot support any weight.

Bleeding affects the workability of concrete

There are two categories of concrete bleeding; normal and excessive bleeding. These are determined by the amount of water lost through the surface of the concrete structure. Both normal and excessive bleeding can affect the final quality of the concrete and the overall durability of the structure.

Normal bleeding is that which often occurs in all concrete projects. When you see freshly-poured concrete, it will often have a very thin layer of water on its surface. This is nothing to worry about and can actually enhance the workability of the mixture. The improvement in workability makes it easier to pour and work with before it sets. It also gives the concrete a smooth finish.

Excessive bleeding is an abnormal amount of water loss through the surface of the concrete. The mixture is usually too wet before it is poured. Contractors should keep an eye on their concrete batch and add more cement or dry aggregate if they think the mixture is too runny. Excessive bleeding leads to a high loss of water and a dry, brittle concrete structure.

Concrete that has suffered from excessive bleeding may also have large voids in the centre of the structure where heavy aggregates have moved the fine particles out of their way as they sink. This creates air bubbles and empty pockets that can severely affect the strength and durability of the concrete.

The best way to prevent concrete bleeding is to use the required amount of water, as printed on the bag of cement. Contractors can also carry out a slump test to check the mixture has the correct ratio of dry to wet ingredients. Bleeding is a normal occurrence with concrete, but excessive bleeding creates long-term problems that cannot be easily repaired.

___

LafargeHolcim is a leading building materials and solutions company that has been operating in international markets for decades. We produce cement and aggregates for construction projects, ranging from small affordable housing developments to large-scale infrastructure projects such as high-rise buildings, dams and bridges. 

___

LafargeHolcim Tanzania has been supplying the country and neighbouring countries with our world-class Tembo cement brand for over 30 years. Our head office and fully-integrated plant are located in Mbeya, Southwest Tanzania.

___

At LafargeHolcim Tanzania, we believe customers come first. We listen to your specific requirements to supply and develop the best solutions for your needs. As the new leader in building materials, you can also rely on our cutting-edge research and development capabilities that have resulted in the finest materials for your construction projects, whether large or small.

___

Follow us on Facebook, Twitter, LinkedIn and Pinterest for the best tips on construction, handy projects and the latest industry news. See our Instagram channel for more insights into our products.

Synthetic fibres can increase the durability of concrete

Contractors sometimes add synthetic fibres to their concrete mix. These fibres of man-made polymers are specifically engineered to withstand the long-term alkaline environment within a concrete mix. They are used to minimise cracking, lower the permeability of the concrete and increase the strength of the structure. They act as a secondary reinforcement element; the primary …

The eight types of construction company

There are many different types of construction company. Not all contractors specialise in the same fields and not all companies do the same construction work. Depending on the type of work they do, construction companies can be classified into the following eight types: 1. General contractors A general contractor provides all of the labour, equipment, …

How to fix common concrete slab problems

When working with concrete, contractors may encounter a few different problems. The following issues can sometimes occur when pouring concrete slabs. While some aspects of working with concrete slabs have changed over the years, many issues have not. Here are three common problems that come with pouring concrete slabs, and their possible solutions. 1) Excessive …

How to prevent dampness in a building

Dampness in a building may occur due to faulty construction, the use of poor-quality building materials or bad architectural design. Dampness affects the lifespan of a building or structure, but it also creates unhygienic conditions. Mold and fungi love to grow in damp conditions, so it is best to fix any signs of wet concrete …

The importance of having a schedule for a construction project

Construction projects are delicate operations that need to run on time in order to stay within the allocated budget. As soon as a project is delayed, it costs the contractors and building owners more money. Having a strict schedule is important as it keeps the project on time and allows all workers to know when …

How to prepare a concrete surface for a topping

Sometimes concrete surfaces are given a decorative topping that adds further protection and durability to a floor or carpark. The underlying concrete will need to be prepared properly before any topping is laid on top. This will ensure that a good bond is formed between the two materials and that no cracks or chips will …